Single-Wire Omnidirectional 360 FPV Drone Detector 30-6000Hz Portable Handheld Drone Detection Equipment

Wireless Signal Drone Detector Introduction

Drone Detector Wireless signal applications are becoming increasingly widespread, resulting in growing security risks. Professional wireless signal detection equipment is expensive, heavy, and requires operation by specialists, making it inconvenient for personal use. Based on this, we designed the user-friendly wireless signal detector.

The Wireless Signal Detector SD810(PRO) has a built-in lithium battery, is compact and portable, and can be charged via the USB Type-C interface with 5V power. The detection frequency range is 10MHz to 6GHz. Different frequency bands (Full Band, WiFi Band, 5G WiFi Band, 5G Band, 3G/4G Band, 2G Band) can be selected based on the application scenario to detect wireless signals. Through the conversion and measurement of received signals, the signal strength is displayed in real-time on the LCD. This device also features alarm functions: buzzer alarm (the stronger the signal, the more urgent the beeping), vibration alarm (the stronger the signal, the more urgent the vibration), and simultaneous vibration and buzzer alarm.

• 5V is sufficient for charging(Full frequency band)
• WiFi frequency band, 5G WiFi frequency band, 5G frequency band, 3G/4G frequency band, 2G frequency band) Detect wireless signals through docking For the conversion and measurement of the received signal,
• the signal strength is displayed on the LCD in real time. This device has both alarm functions, namely buzzer alarm (signal The stronger the buzzer, the more rapid the sound), vibration alarm (the stronger the signal, the more rapid the vibration), and vibration and buzzer alarm at the same time.
• The following table details the performance indicators of the product.

The following table details the product’s performance specifications.

Drone Detector Product Features

Detector Technical Specifications

Specification/Parameter	SD810(PRO)
Frequency Range (MHz)	10~6000 MHz
Signal Measurement Range	-60~10 dBm
Amplitude Accuracy	±1 dBm
Band Selection Function	Supported
Adjustable Alarm Threshold	Supported
Alert Modes	Silent, Buzzer, Vibration, Simultaneous Buzzer & Vibration

Specification/Parameter	SD810(PRO)
Alert Modes	Silent, Buzzer, Vibration, Simultaneous Buzzer & Vibration
Display Refresh Rate	20 Hz
LCD Resolution	135 × 240
LCD Size	1.14 inch
RF Interface	SMA-K
Battery Type	Lithium Battery
Battery Capacity	600 mAh
Charging Time	3~4 hours
Charging Interface	USB Type-C
Battery Endurance	8 hours
Dimensions	45*78*12 mm (excluding knob and antenna height)
Operating Temperature	-20 ~ 45°C
Storage Temperature	-20 ~ 70°C

Drone Detector Functions and Usage

Appearance and Button Introduction

1. Charging Indicator: Red when charging, green when fully charged.
2. USB Interface: USB Type-C, charging power supply 5V/1A.
3. Antenna Interface: Standard SMA female (SMA-K, external thread, inner hole) should be used with a standard male connector (SMA-J, internal thread, inner pin). Note: The normal service life of the SMA interface is approximately 1000 connections (beyond this, signal contact loss may increase or contact may become unstable).
4. Button (Short Press):
   • In the off state: short press to power on.
   • In the main interface when a signal is detected: short press to modify the threshold using the current signal strength as the minimum reference level.
   • In the detection type (band selection) interface: short press to select different types. No further operation is needed after selection; the device automatically returns to the main interface upon successful selection.
   • In the alarm mode selection interface: short press to select different alarm modes. No further operation is needed after selection; the device automatically returns to the main interface.
5. Button (Double Press): In the main interface, double-click to enter the detection type (band selection) interface. In the current interface, double-click to enter the alarm mode selection interface. In the above two interfaces, double-click the button to return to the main interface.
6. Button (Long Press): In any interface, press and hold to power off.

Interface and Functions

Main Interface

The classification of the user interface is explained in the diagram below. Through band configuration, one interface integrates:

• Current signal strength display (unit: dBm).
• Signal strength color bar (Green: weak signal, Red: strong signal).
• Signal strength axis.
• Current detection minimum reference threshold value (unit: dBm).

Band Selection Interface

In the main interface, press and hold (Note: The text says ‘long press’ but likely refers to the action to enter the menu; based on context from page 7, it might be a double press or long press? The manual text on page 6 says ‘long press’ to enter band selection, but page 7 flow suggests double press. We’ll keep the text as per page 6: Long press) to enter the band selection interface. There are 6 selectable bands. The default setting is Full Band. Short press to switch bands:

• Full Band
• WiFi Band
• 5G WiFi Band
• 5G Band
• 3G/4G Band
• 2G Band

Alert Mode Selection Interface

In the band selection interface, press and long press to enter the alert mode selection interface. There are 4 selectable alert modes. The default is sound mode. Short press to switch modes:

• None (Silent)
• Sound (Buzzer)
• Vibration
• Sound + Vibration